iHOS Quadro DSP 2.0
Quadro DSP 2.0, is a DSP digital amplifier of 4*500W@4Ω / 4*300W@8Ω ,Bridge 2*1000W@8Ω, support constant 70V/ 100V(1000W@10Ω). It can monitor the status of amplifier and adjust the function of DSP in real time and remotely. DSP functions of built-in: noise gate, matrix mixer, PEQ, crossover, delay, compressor etc.
It can be used in: Meeting Rooms, Medium/ Big conference rooms, Schools, Restaurants, Shopping malls.
Input: PEQ 15 PEQS
Output: PEQ 10 PEQS
Crossover: Butterworth, Bessel, Linkwitz 6~24
Output Delay: Input Delay:2*100ms / Output Delay:4*20ms
Output Compressor: Knee, Threshold, Attack, Ratio, Release
Output Limiter: Threshold-90dBu~21dBu, Release 1~2895ms
DSP Presets: 30 (one for factory preset)
Control port: TCP/IP, USB, RS485, RS232.
Network: 2*RJ45 TCP/IP, 1000base-T/ 100base-TX
Channels: 4
Power: 4*300W@8Ω 4*500W@4Ω
Bridge Power: 2*1000W@8Ω
Input Interface: Balance 4*XLR；Unbalance 4*RCA
Output Interface: 4*Terminal
Cooling Mode: 2*fans intelligent control
Gain 6dBu ：30dB (29.5 times) ；0dBu ：36dB (31. 1 times)
Maximum Input Level 6dB ：16dBu (4.9V)
SNR 6dBu ：94dB ；0dBu ：94dB
Frequency Response 20Hz ~ 20kHz (±0.5dB)@1W ，8Ω
THD+ N: <0. 1%@1W-full power
Sample Rate: 48K/24bit
Channel Isolation: <-70dB
Work Mode: Stereo, Bridge, Mono, free Matrix
Remote Control: Standby, Call, DSP functions
Amplifier Monitor: Temperature, Power, Current and Voltage
Constant Voltage and Resistance: 100V 、70V 、8Ω 、4Ω
Display: 320x320pixel, IPS LCD
Protection Mode: DSP limiter、High temperature, DC, high frequency, short circuit, back EMF, peak current limiter、Back EMF、Surge current limiter, startup delay, power circuit breaker protection, power over voltage / under voltage protection.
PC Software: MConsole
Weight: 4Kgs.
Size: 483 x 300 x 445 mm.
Power Input: 110 – 264 Volt AC, 50/60 Hz.
You must be logged in to post a review.
Related products
-
Suitable for the installation market (70/100 V) Powerful digital DSP Bridge and stereo mode SMPS & Class D technology OLED display and PC configurable The DAP CA-4500 DSP is a high power digital 4-channel amplifier with 500 W in 4 Ohm and four 500 watt speakON outputs. It can drive a 70/100 V speaker system …
-
Class D amp, SMPT and Soft Start technology 1U suitable for 19″ rack Advanced protection circuits Stereo and bridge mode Indicator LEDs for connection and clipping The DAP CA-2300 is a 2x 300 watt amplifier for a compact 19-inch installation with a 1 unit height. Equipped with Class D technology and SMPS, the CA-2300 has …
-
Class AB amplifier Efficient forced air cooling Bridge, parallel and stereo mode Full protection circuits 19″ / 2U design The DAP HP-500 is a simple yet effective and safe 2x 200 watt amplifier with bridge, parallel and stereo mode, suitable for audio installations at public places, such as clubs, bars and other small venues. Its …
-
Class AB amplifier Efficient forced air cooling Bridge, parallel and stereo mode Full protection circuits 19″ / 2U design The DAP HP-900 is a simple yet effective and safe 2x 450 watt amplifier with bridge, parallel and stereo mode, suitable for audio installations at public places, such as clubs, bars and other small venues. Its …
-
Quadro 6.4, is a multi-functional network DSP digital power amplifier. It can monitor the status of amplifier and adjust the function of DSP in real time remotely. Built-in DSP functions with compressor, limiter, noise gate, PEQ, matrix mixer, delay etc. Mconsole software with its elegant interface provides with easy setup and nice operation experience. Variety …
-
Perfect sound quality and long lifespan Robust steel 19″ / 1U housing Suitable for either mobile and installation speakers Bridge and stereo modus SMPS, Class D amplification & Soft start technology The DAP Qi-4600 is a 4x 600 watt amplifier suitable for the DAP-Xi speaker range. Each channel has its own gain control and protect, …
Reviews
There are no reviews yet.