FOS Atlas Tube

Atlas Tube offers WiFi control via smartphone/tablet and Wireless control signal to multiple Atlas Tubes functions.

Atlas Tubes can be controlled with the following ways:

Wirelessly, with WiFi option activated independently: Each tube can broadcast its own WiFi network, offering the ability of connecting independently to each bar via smartphone or tablet, and selct a colour or an autoprogram via the LED Lamp application.

Wirelessly, with WiFi option activated in a single group. Multiple Atlas Tubes can be controlled via smartphone or tablet, through the LED Lamp app. One Tube, can be set as transmitter (Menu – Set – Wireless 2.4G – Wireless: ON – Mode: Transmit), while the rest Tubes set as Recievers. On the transmitting Tube, activate the WiFi network broadcast in the Menu – Show – WiFi, and note the network name (for example LED_700).
Make sure that the recieving Tubes are set to DMX Mode, and their screen are showing a DMX address 001. Connect your smartphone or tablet to the Tubes’ network, start the LED Lamp app and control your group of Atlas Tubes.

Wirelessly, with DMX control. Multiple Atlas Tubes can be controlled via any DMX desk or software. One Tube can be set as a transmitter, while the others as recievers. The recievers can have different DMX addresses. The transmitter Tube, must be connected physically with the DMX desk.

*Transmitting Tube will have a blue LED indication, while the paired recieving Tubes will have a green one. The flickering red LED indicates that there is no pairing/connection available. 

IR Remote Control. A single or multiple Atlas Tubes can be controled simply by using the supplied remote control. If multiple Tubes are paired with the transmiting Tube, they can be controlled at the same time with their Master / Transmitting Tube. Note that the IR Remote must be directed in the Tube with the IR sensor activated.