Category: Flammer
Flammer
Showing 1–24 of 64 resultsSorted by latest
-
Universal flammespray for flammeprojektorer Alcatech Flamespray er en spesialdesignet flammespray for Alcatechs ulike aerosolbaserte flammeprojektorer. Den spesielle gass/drivstoffblandingen skaper voluminøse og kraftige flammer som brenner uten lukt eller rester. Flammesprayen er produsert i Tyskland og har alle nødvendige sikkerhetsdatablader og kan også brukes offentlig uten å nøle. Flammesprayen leveres uten sprayhette. Dette tjener til å …
-
Oppdag den fascinerende FlameGun fra det anerkjente selskapet Alcatech – ditt perfekte supplement for imponerende sceneshow og arrangementer! Den profesjonelle FlameGun skaper fantastiske branneffekter som vil forbløffe publikum. Med presise kontroller og sikker håndtering tilbyr FlameGun en imponerende pyroteknisk ytelse som vil gjøre showet ditt uforglemmelig. Alcatechs FlameGun drives av to aerosolpatroner som kobles sømløst …
-
T-distributor with 1 inlet and 1 outlet straight 1.1/4″ and 1 outlet in T 3/4″.
-
Transmitter and receiver wireless for connection DMX-512.
-
T-distributor with 1 inlet and 1 outlet straight 1.25″ and 1 outlet in T 3/8″.
-
Transmitter and receiver wireless for connection DMX-512.
-
Dispenser with 1 inlet 1.1/4″ and 6 outlets 1/4″.
-
The FUEL DISTRIBUTOR 1 TO 6 is a dispenser with 1 inlet 1.1/4″ and 6 outlets 1/4″. It allows the installation of a Showven Flame System.
-
The WDMX RECEIVER is to receive the data from the transmitter and so it goes on each device. It takes 1 per product. Band 2.4Ghz ISM (2.4 à 2.525Ghz) 512 channels – 7 Groups Sensitivity -94dBm
-
For the WDMX TRANSMITTER, only one is sufficient, it is installed at the output of the DMX Controller. Very easy to use. Band 2.4Ghz ISM (2.4 à 2.525Ghz) 512 channels – 16 Groups Power 20dBm
-
Transmitter and receiver wireless for connection DMX-512.
-
Secondary supply hose for Showven Flame System with 3/8″ inlet and outlet Length 80m
-
Secondary supply hose for Showven Flame System with 3/8″ inlet and outlet Length 40m
-
Secondary supply hose for Showven Flame System with 3/8″ inlet and outlet Length 20m
-
Transmitter and receiver wireless for connection DMX-512.
-
Supply hose for Showven Flame System with 3/4″ inlet and outlet Length 40m
-
Supply hose for Showven Flame System with 3/4″ inlet and outlet Length 20m
-
Supply hose for Showven Flame System with 3/4″ inlet and outlet Length 10m
-
Transmitter and receiver wireless for connection DMX-512.
-
Main supply hose for Showven Flame System with 1/2″ inlet and outlet Length 40m
-
Main supply hose for Showven Flame System with 1/2″ inlet and outlet Length 20m
-
Main supply hose for Showven Flame System with 1/2″ inlet and outlet Length 10m
-
Transmitter and receiver wireless for connection DMX-512.
-
Main supply hose for Showven Flame System with 1.1/4″ inlet and outlet Length 20m
